Industries
Pressure washing for business parks and office parks.
Walkways, plazas, entries, parking, break areas, trash enclosures and building walls across every building in a business park, washed on one plan for the property manager.
A whole campus, washed to one standard.
A business park is a small city. Several buildings share a ring road, parking fields, landscaped walks, courtyards and a handful of trash enclosures, and dozens of companies lease space inside. When one building’s entry is spotless and the next is streaked and stained, the park as a whole looks uneven.
Raincrest washes the shared exterior of a business or office park on one plan. The property manager gets one schedule and one point of contact for every building, while each frontage gets the attention its traffic calls for. A single office building has its own office building pressure washing plan.
Office parks in our service area.
Business and office parks line the freeway corridors across our service area. Most share a pattern: several buildings around a ring road, shared parking fields and walks, and a handful of enclosures.
The plan follows the park itself: which buildings face the street, where people walk between them and when the lots run empty.
Walks, plazas and the paths between buildings.
People walk between buildings all day, to meetings, to the café and out to their cars. Those paths, the central plaza and any courtyard seating collect gum, coffee spills, pollen and the green film that grows where sprinklers overspray. We wash them with a surface cleaner for an even finish and give the busiest crossings extra passes.
Pavers, stamped concrete and decorative stone in plazas get a lower setting than drive aisles, and planters, benches and the base of light poles are washed along the way.
Entries and walk-off zones.
Each building’s front door carries the park’s reputation. We wash the entry walk, steps and ramps, the area around the doors and the lower walls, and lift gum where people stand and wait. Entry mats are lifted so the concrete beneath them is clean too.
Storefront-style entries in the park are washed through storefront washing, and full building walls through building exterior washing.
Smoking areas, break patios and enclosures.
Designated smoking and break areas take ash, butts, food spills and heavy staining around benches. Those slabs, the seating and the wall behind them are washed each visit so they stay usable and do not drag down the look of the building next door.
Shared trash and recycling enclosures are washed inside and out, with the pad, walls, gates and hauler approach included. Loading doors and dock aprons at flex buildings in the park can join the same visit.
Parking fields and the ring road.
Large parking fields carry oil spots, tire marks and leaf stains under trees. We wash stalls and drive aisles in sections overnight or on weekends, keeping a route open for anyone who works late. Parking structures in the park are washed a level at a time.
Our parking lot and garage washing page covers the method for lots and decks, and the guide to how often to pressure wash a commercial property helps set each area’s interval.
Signs, curbs and the edges of the park.
Visitors read a business park from its edges first. The monument sign at the entrance, the directory boards at each fork of the ring road and the curbs leading in all gather dust, sprinkler spotting and the black streaks tires leave where trucks cut a corner. We wash sign faces and bases at a gentle setting, then the curbs, gutters and crosswalk approaches along the route a first-time visitor drives.
Bike racks, bus stop pads, bollards, fence lines and the shaded walks beside the planted beds join the same visit, so nothing at the perimeter looks forgotten. Ring road gutters feed the park’s storm drains, so crews plan water use for each stretch and protect every inlet along the wash. Tags on signs or walls are handled through graffiti removal before they spread to the next building.
One plan for the manager.
The property manager receives one written quote listing every building and area, with one schedule to match. A supervisor inspects the finished work against the plan, and anything that needs another pass is handled before the crew leaves the park.
Every crew member is background-checked, and the owner and management company receive a certificate of insurance. Pricing reflects total hardscape square footage, the number of entries and enclosures, staining, wall heights and the hours available, and drain inlets near each work area are covered before washing starts.
A few useful answers
Common questions.
Can every building in our park go on one schedule?
Yes. The park runs on one written quote and one calendar, with each building and area listed inside it.
Will tenants still be able to park while you wash?
Yes. Lots are washed in sections at night or on weekends, and a route always stays open for cars.
Do you wash the smoking and break areas?
Yes. Slabs, benches and nearby walls are washed every visit to clear ash, butts and food stains.
Who checks the work across the park?
A supervisor inspects every building and area against the written quote before the crew leaves, and any spot that needs another pass gets it that night.
Can the entrance signs and directory boards be washed too?
Yes. Monument signs, directory boards and their bases are washed at a low setting on the same night as the walks and curbs.
Services